Product

T6 Series-Single Pumps

T6 Series-Single Pumps

Zhejiang Goodwill Machinery Co., Ltd.

0

T6 Series-Single Pumps Details

T6 Series-Single Pumps


Shape and introduction

High pwesre and high performange domel pin type vane pumps ave widely ased for plastic machinery, casting machinery, metallurgy asdiaery, pressling smashisery, sefining maclinery, construction machinery, marise-Muchinery.

The mais features are:

1. Wwh dowel pin vane siuctire. it can werk in tigh pressune, low soise and long lifetime.

2. This vme puerp can fir wide viseooity tydtidie nodium and be soartod at low tempenture and wurk aa hich wmperaure.

3. As the vane puaip adopts bilsbial stucure ame, it hus high oll polutioa resitance and wide speed soope.

 

Model descriptions:

T6C -17 -1 R 00 -A 1
Code
of series
Flow code Shaft type Direction of
rotation
Outlet Positions Designing
No.
Sealing Level
T6C 03、05、06、08、10、
12、14、17、20、22、
25、28、31
See of shaft (viewed from
shaft end of pump)
R-right hand for
clockwise
L-left hand for
counter clockwise
(viewed from
shaft end of pump)
00-Opposite inlet port
01-lnline with inlet
90CCw from inlet
90 Cw from inlet
A 1-St,NBR Nitrile rubber
5-S5,Fluororubber
T6D 14、17、20、24、28、
31、35、38、42、45、
50、61
T6E 42、45、50、52、57、
62、66、72、85

 

T6 Series-Single Pumps


series Flow
code
(USgpm)
Geometric
displace-
ment
mL/r
Max.pressure Mpa Max.speed t/min Min
speed
r/min
Antiwear hydraulie
oil
General hydraulic
oil or phosphate
eater fluid
Water glycol fluid
or water-oil
emulsions
General
bydraulic oil or
antiwear
hydraulic
oil
Water glycol
fluid or
phosphate
eater fluid
or water-oil
emulsions
Instant Continuous Instant Continuous Instant Continuous
T6C 03 10.8 28 24.5 21 17.5 17.5 14 2800 1800 600
05 17.2
06 21.3
08 26.4
10 34.1
12 37.1
14 46.0
17 58.3
20 63.8
22 70.3
25 79.3 2500
28 88.8 21 16 16
31 100.0
T6D 14 47.6 24.5 21 21 17.5 17.5 14 2500 1800 600
17 58.2
20 66.0
24 79.5
28 89.7
31 98.3
35 111.0
38 120.3
42 136.0 2200
45 145.7
50 158.0 21 16 16
61 190.5 12 8 8 8 8 8
T6E 42 132.3 24.5 21 21 17.5 17.5 14 2200 1800 600
45 142.4
50 158.5
52 164.8
57 179.8
62 198.7
66 213.3
72 227.1
85 269.0 9 7.5 7.5 7.5 7.5 7.5 2000

Installation Dimensions


  T6CC
E 38.1
F 823
G 161.6
J1 101.60
J2 101.55
N 146.1
O 174.5
ΦP 14.3

 

  T6D T6E
E 38.1 52.3
F 87.4 110.0
G 184.9 225.3
J1 127.00 127.00
J2 126.95 126.95
N 181.0 181.0
O 212.4 213.0
ΦP 17.5 17.5

 

 

Model Shaft code Max torque
(N.m)
L1 L2 DIA K1*K2 H1 M1
T6C 1 275 58.2 38.1 22.225/22.200 6.35*6.30 24.53 M8*16
2 238 71.4 31.7 22.225/22.200

4.76*4.71

28.22 -
3 343 40.7 24.5 SAEJ498b1, diameter section 16/32, 13 teeth -
4 45.5 24.5 SAE J498b1, diameter 16/32, 15 teeth -
T6D 1 83.6 49.3 31.750-31.700 7.94*7.89 35.27 M10*20
2 577 73.2 38.1 31.750-31.700 7.94*7.89 35.27 -
3 55.2 38.0 SAE J498b1, diameter 12/24, 14 teeth -
4 77.7 48.0 SAE J498b1, diameter 12/24, 14 teeth -
T6E 1 90.9 50.8 38.100-38.050 9.52*9.47 42.36 M10*20
2 577 61.9 38.1 31.750-31.700 7.94*7.89 35.27 -
3 55.2 38.0 SAE J498b1, diameter 12/24, 14 teeth -
4 62.2 31.5 SAEJ498b1, diameter section 12/24, 17 teeth -

•work at maxlmum flow and pressure.

 

oil port Flange Dimensions(mm)
A1 B1 C1 D1 T1 Thread
T6C P 1"

F08

26.2 52.4 25.4 76.2 3/8"-16UNC×19.0
S 1-1/2"

F12

35.8

70.0

38.1

76.2 1/2-13UNC×22.4
T6D P 1-1/4" F10 30.2 58.7 31.8 82.6 7/16"-14UNC×22.3
S 2" F24 42.9 77.8 50.8 82.6 5/8"-11UNC×23.9
T6E P 1-1/2" F12 35.7 69.8 37.1 98.6 1/2"-13UNC×23.4
S 3"
F32
61.9 103.4 75.0 98.6 5/8"-11UNC×24.0
Views: 88
CONTACT US